點擊圖片查看原圖
玖城牌超低溫潤滑脂
產品型號:KW2201 KW2202 KW2203
產品描述:玖城牌超低溫潤滑脂采用低粘度酯類合成油，添加極壓抗磨、抗氧化、防凍及防腐蝕等多種添加劑精制而成。
產品特點:
極低的啟動力矩和運轉力矩，優秀的低溫流動性，非常適合嚴寒環境下的機械設備。
較佳的高溫穩定性，適合于溫度復雜多變環境下設備的潤滑。
優異的氧化安定性，機械安定性能和膠體安定性，避免和減少潤滑脂流失損耗。
良好的防潮濕和防水琳性，潤滑單元可以在低溫潮濕工況下得到全面的保護。
產品應用:
為航空潤滑設計，適用于飛機的重負荷齒輪、襟翼操縱機構，鏈條傳動等機械部件的潤滑。
用于極低溫環境下的滾動/滑動軸承、齒輪等機械摩擦部件的終身潤滑與防護。
用于所有類型的機械設備、軸承、滑軌、凸輪、導軌等，特別適合使用在零下溫度的運行條件。
使用溫度:-70℃～280℃
JC Ultra-low Temperature Grease
Product number:KW2201 KW2202 KW2203
Product description:JC Ultra-low temperature grease is used low viscosity ester synthetic oil,and added extreme pressure anti-wear, anti-oxidation, anti-freeze and anti-corrosion and other additives refined.
Performance characteristics:
Extremely low starting torque and operating torque, excellent low-temperature fluidity, is very suitable for mechanical equipment under severe cold conditions.
Better high temperature stability, suitable for the lubrication of equipment under complex and changeable temperature.
Excellent oxidation stability, mechanical stability and colloidal stability, to avoid and reduce the loss of grease loss.
Good moisture-proof and waterproof, lubrication unit can be fully protected under low temperature and wet conditions.
Recommended use:
For aviation lubrication design, suitable for aircraft heavy load gear, flap control mechanism, chain drive and other mechanical parts lubrication.
It is used for life lubrication and protection of mechanical friction components such as rolling / sliding bearings and gears in extremely low temperature environment.
It is suitable for all types of mechanical equipment, bearings, slide rails, cams, guideways, etc., and is especially suitable for operating below zero temperature.
Temperature range:-70℃ to 280℃
玖城牌超低溫潤滑脂的典型數據：Typical data of JC Ultra-low temperature grease:
|
項目Project |
典型數據Typical data |
|
外觀 Appearance |
白色光滑均勻油膏 |
|
工作錐入度/0.1mm 60次 Penetration 1/10mm 60 times |
235--285 |
|
滴點，℃ Drop point,℃ |
330 |
|
銅片腐蝕（T2.100℃.24h） Copper corrosion（T2.100℃.24h） |
合格PASS |
|
水淋流失量（79℃，1h）% Sprinkling loss（79℃，1h）% |
1.1 |
|
鋼網分油（100℃，24h）% Steel mesh oil filtering（100℃，24h）% |
0.9 |
|
防腐蝕性（52℃，48h） Corrosion resistance（52℃，48h） |
合格 PASS |
|
極壓性能（四球機法）Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
460 |
|
抗磨性能（四球機法）（40kg,60min)/mm Antiwear performance (4-ball test)（40kg,60min)/mm |
0.39 |
|
蒸發度（120℃，m/m）% Evaporativity（120℃，m/m）% |
≤1 |
|
適用工作溫度℃ Applicable working temperature ℃ |
-70--+280 |